Belt Pulley
Belt Pulley
Moving Forward With the Multi Rib Belt
Also known as the drive belt, the multi rib belt serves to supply power to a number of the engine’s operating components--the A/C compressor, the alternator, and the water pump. In the old days, vehicles made use of the traditional V-belt in order to power these components. This changed in the late 1970’s when the multi rib belt was invented. Unlike the V-belt, this power component is able to endure a higher level of tension because of its greater width. Also because of this measurement difference, it does not get stretched easily even though it is constantly subjected to tension. In the past, using V-belts required vehicle owners to use quite a number of pulleys and belts that tug on them. This is not the case with multi rib belts.
Because it is composed of only a single continuous belt and makes use of fewer pulleys, the multi rib belt lessens the workload for the engine. This results to better fuel economy and better mileage. Greater engine power, which can be used to increase speed or to drive on steep roads, is also made available. Made from high-tension chords and synthetic rubber that withstands frequent exposure to stress, the multi rib belt can be expected to last. In the course of time, however, this component will eventually deteriorate, but in such case, a driver will not have such a hard time identifying where the problem occurred. A sizeable decrease in the vehicle’s steering control will serve as an indicator that it needs to be replaced with a new one.
In the past, the several belts comprising the V-belt made it harder for a driver to notice when there is already something wrong with it. Most often than not, the only concrete indicator of a malfunctioning V-belt was a total engine collapse. Fortunately, the V-belt is now a thing of the past. With the multi-rib belt, troubleshooting has been made easier while greater engine power is reserved for heavier tasks.
About the Author
Anthony Fontanelle is a 35-year-old automotive buff who grew up in the Windy City. He does freelance work for an automotive magazine when he is not busy customizing cars in his shop.
 |
 Farmall C tractor IH fenders 3pt hitch runs good belt pulley drive pto lights  US $2,050.00
|
 Farmall IH I12 O12 W12 I14 O14 W14 Tractor Belt Pulley US $875.00
|
 McCormick Deering Farmall I H Belt Pulley O12 I12 W12 O14 I14 W14 Rare Rare US $850.00
|
 JOHN DEERE EARLY 520 TRACTOR ORIGINAL CLUTCH BELT PULLEY RARE FIND US $750.00
|
 VINTAGE 42x8 FLAT BELT PULLEY HIT AND MISS ENGINE STEAM ENGINE TRACTOR US $600.00
|
 Oliver 540 Rear PTO Flat Belt Pulley Super 55 550 RARE Tractor Part Gear Box US $516.36
|
 AA5263R A4350R JOHN DEERE 60 Belt Pulley Clutch Assembly US $449.99
|
 JOHN DEERE M TRACTOR NEW OLD STOCK BELT PULLEY ATTACHMENT RARE FIND US $400.00
|
 ALLIS CHALMERS D14 D15 D17 D19 BELT PULLEY DR US $365.00
|
 John Deere Belt Pulley Assembly for 720 and 730 F3376R Hard to Find US $350.00
|
 Massey Ferguson PTO Flat Belt Pulley Unit US $349.00
|
 Massey Ferguson Rare Tractor PTO Flat Belt Pulley Unit 35 50 65 US $329.16
|
 John Deere 2010 3010 4010 belt pulley US $300.00
|
 Original John Deere M Series Belt Pulley Professional Rebuild MT MI MC M US $250.00
|
 International IH Farmall Belt Pulley WD 9 Super WD 9 US $249.00
|
 IH Farmall International Cub Lo Boy Angle Belt Pulley Drive Assembly US $245.00
|
 Claas 06449090 Pulley V Belt NEW US $229.99
|
 John Deere Early H Clutch Belt Pulley with Sleeve and Gear H330R US $200.00
|
 International IH Farmall Minneapolis Belt Pulley Steam US $199.99
|
 Oliver Belt Pulley K691A US $199.99
|
 Oliver 66 70 77 80 88 rowcrop tractor steel belt pulley US $175.85
|
 Rare Original Farmall IH H M MD MTA 300 350 400 450 Steel Belt Pulley 10 3 4 US $150.00
|
 IH Farmall A B C SA SC PTO belt pulley complete 6614 DA US $145.00
|
 Farmall F20 tractor NICE original Steel Belt Pulley US $135.85
|
 Farmall Cub rowcrop tractor Original Steel Belt Pulley US $135.50
|
 Farmall H SH 300 350 Tractor Orignal IH paper Belt Pulley REAL NICE w bolts US $128.50
|
Checking Your Drive Belt
Car maintenance is essential if you want your car to stand the tests of time. There is plenty of responsibility for car owners, some of which really goes overlooked. There are many things that people do not realize they can take care of themselves. The drive belt is one of these things that you can both check on and change yourself if needed. This is just one of many items under your hood that you should be paying close attention to. It certainly does not hurt to keep a list of the things that you should be checking on regularly.
You may find that your drive belt squeals when it is in need of replacement. It is a very noticeable sound that is easily identifiable once you have heard it. If you do have it serviced by someone else, make sure that it is someone that is certified to do so. There are many oil and lube places that do not have fully licensed mechanics. Getting these people to do that is not at all recommended. It is much better to do it yourself or seek out a certified auto shop.
The car should always be turned off and the engine cooled down before you attempt to do any kind of maintenance under the hood. To neglect this could result in burns or other injuries. Checking on the drive belt is something that you should do every so often when you check your oil or have it changed. This is a good, regular schedule for maintenance. You need to be aware if your drive belt is breaking down or becoming incredibly worn. If it were to break completely you could be stuck stranded and in need of a tow truck.
You need to know what to look for when you are checking over your drive belt. If there are small cracks or signs of wear, that is generally normal and nothing to worry about. However, if you notice large splits or tears in the belt, then you will need to replace it. Look for such things as frays or obvious stretching as well. Those are great indicators that your belt is close to the end of its lifespan.
You may prefer to equip yourself with a tension gauge before you replace any of your belts. It will help you to measure the accurate tension so that you do not put the new one on too tight or too loose. There is a tension adjuster near your belts as well which is for securing it to the right level of tightness. You need to be careful when doing this. Check your manual if you are not sure where to find it.
Removal of the old belt is relatively easy. You simply release the tension with the tension adjuster and then slip the belt off of the pulleys. Replacing it with the new one is much the same. Make sure that the new belt is the right one for your vehicle as well as the correct size. Double check this before you get started.
About the Author
Find the best deal on the auto insurance coverage you need. Visit us today for money-saving tips and receive free auto insurance quotes for the cheapest insurance rates from respected insurance companies.
