Pto Shield

Home > Agriculture & Forestry > Pto Shield

February 21st, 2010 admin Leave a comment Go to comments

Pto Shield

Power take-off

I want to introduct something about Sony MV900SDS Overhead DVD DreamSystem Overhead. Sony MV900SDS Overhead DVD DreamSystem Overhead Description: Sony brings you a mobile dream with their all-in-one DVD Dream System II. One box, one system, and one unbelievable mobile experience. A driving dream come true, Sony's new mobile DVD Dream System II includes a 9" flip-down LCD monitor with built-in DVD / MP3 player, and a two sets of wireless IR headphones. No more "are we there yet?" from your back-seat passengers. Mount the overhead LCD monitor to the roof of virtually any car, truck, minivan, or SUV and slip in a DVD for instant mobile theater gratification. The 9" widescreen LCD monitor flips down at the touch of a button, and the screen swivels 180?left and right for easy viewing. Built-in IR transmitters send audio to the included wireless headphones while the RF transmitter pumps audio to any FM radio! Built-in stereo speakers offer even more listening options. Installation is a piece of cake, thanks to Sony's ultra-compact housing and slim slot-load DVD player. Simply tap into the

A truck gearbox mounted hydraulic PTO
A power take-off (PTO) is a splined driveshaft, usually on a tractor or truck, that can be used to provide power to an attachment or separate machine. It is designed to be easily connected and disconnected. The power take-off allows implements to draw energy from the tractor's engine.
Semi-permanently mounted power take-offs can also be found on industrial and marine engines. These applications typically use a Cardan shaft and bolted joint to transmit power to a secondary implement or accessory. In the case of a marine application, such shafts may be used to power fire pumps.
Safety

A shaft attached to the PTO.
The PTO and its associated shafts and universal joints are a common cause of incidents and injury in farming and industry. According to the National Safety Council, 6 percent of tractor related fatalities in 1997 in the USA involved the PTO. When a piece of clothing, which can be as small as a single thread, touches a spinning part it can be pulled around the part. The clothing and the person wearing it are pulled into the shaft often resulting in loss of limb or death. Some implements do use plastic guards to try to keep a person from becoming entangled in a PTO shaft, but even with guards people need to exercise caution around PTO shafts when they are plugged into a tractor or truck . In some countries it is illegal to operate a PTO without the shaft guard correctly fastened.
Technical Standardization

A tractor PTO
Agricultural PTOs are standardized in dimensions and speed. The ISO standard for PTOs is ISO 500, which as of the 2004 edition was split into three parts ISO 500-1 (General specifications, safety requirements, dimensions for master shield and clearance zone), ISO 500-2 (Narrow-track tractors, dimensions for master shield and clearance zone), and ISO 500-3 (Main PTO dimensions and spline dimensions, location of PTO). The original type calls for operation at 540 revolutions per minute (RPM). A shaft that rotates at 540 rpm has 6 splines on it, and a diameter of 1?". Two newer types, supporting higher power applications, operate at 1000 RPM and differ in shaft size. The larger shaft has 20 splines (1?" diameter), while the smaller has 21 (1?" diameter). All three types rotate counterclockwise when viewed from the tractor. A 10 spline type was used with some early equipment such as the 1948 Land Rover, a six spline adapter was usually supplied. It is customary for agricultural machines manufacturers to provide the nominal PTO power specification, an indication of the available instantaneous power at the shaft.
Commercial Vehicle PTOs
Truck transmissions have one or more locations which allow for a PTO to be mounted. The PTO must be purchased separately and care is required to match the physical interface of the transmission with a compatible PTO. PTO suppliers will usually require details of the make, model and even serial number of the transmission. Care is also needed to ensure that the physical space around the transmission allows for installation of the PTO. The PTO is engaged/disengaged using the main transmission clutch and a remote control mechanism which operates on the PTO itself. Typically an air valve is used to engage the PTO, but a mechanical linkage, electric or hydraulic mechanism are also options.
Units will be rated according to the continuous and intermittent torque that can be applied through them and different models will offer different "PTO shaft rotation to engine RPM" ratios.
In the majority of cases the PTO will connect directly to a hydraulic pump. This allows for transmission of mechanical force through the hydraulic fluid system to any location around the vehicle where a hydraulic motor will convert it back into rotary or linear mechanical force. Typical applications include:
Running a water pump on a fire engine or water truck
Powering a blower system used to move dry materials such as cement
Raising and lowering a dump truck bed
Operating the mechanical arm on a bucket truck used by electrical maintenance personnel or Cable TV maintenance crews
Operating a winch on a tow truck
Operating the compactor on a garbage truck
Operating a Hiab/Grapple truck
It is also possible but less common to connect something other than a hydraulic pump directly to the PTO.
References
([dead link] Scholar search)Power-Take-Off (PTO) Safety, National Safety Council, 2004-03-30, http://www.nsc.org/library/facts/agripto.htm, retrieved on 2007-04-19
Privette, Charles (2002-03-01), Farm Safety & Health - PTO Safety, Department of Agricultural and Biological Engineering, Clemson University, http://www.clemson.edu/safety/pto.htm,...(and so on) To get More information , you can visit some products about axial piston pump, Liquid Dispenser Pump, . The Sony MV900SDS Overhead DVD DreamSystem Overhead products should be show more here!